- BrandCameron
For more than three decades, electrically powered C Series inline sampler has been one of the most accurate and reliable methods of extracting a product sample from a pipeline for basic sediment and water (BS&W) analysis.
S-Series Probe
The C-Series isokinetic inline sampling probe (shown assembled with a controller) requires neither air nor hydraulics to capture samples. Rather, probe is actuated by an electrical pulse from a controller, and uses existing pipeline pressure to fill the sample chamber with product. When the probe is actuated, sample chamber opens, allowing process fluid to flow through the chamber. As the
window rotates, sample is captured in its natural state and fed by pipeline pressure to a receptacle. By ensuring that the process fluid is well-mixed and homogenous prior to sampling, and using
sampling process that collects the sample directly from the flow stream without changing the linear velocity or direction of flow, customer is assured of obtaining a representative sample.
The C Series sample probe is available in two models:
• The C21 probe collects one sample (1.5 cc) per each 360 ° rotation.
• The C22 probe collects two samples (3 cc) per each 360 ° rotation.
Each model is available in two operating pressure ranges (see Specifications table below). A "V" is used to identify lowoperating-pressure probes. All C Series probes are suitable for sampling in 2-in. to 48-in. pipelines.