- BrandACONKIT
SKD represents the autonomous local system which is not demanding for the operation of the computer which consists of control block (controller), the reader and electronic keys (proksimiti-cards or a brelka). Each electronic key has the unique identification code thanks to which individual control of each owner of the proksimiti-card is exercised.
The operation principle of SKD consists in the following: if the code of the proksimiti-card (brelka) conforms to the programmed requirements, automatic equipment opens the electronic lock put on any barrier (a door, a barrier, a tourniquet, gate, etc.). At the same time the logic of system operation and information on all movements through a point of control are located directly in the controller. The control block provides identification of proksimiti-cards and exercises control of access without information transfer to the computer. It is possible to add/delete users of proksimiti-cards in memory of the controller by means of the master card or TCP/IP connection to the computer. The second writing method "master" allows to give to the proksimiti-card the status.
All information from memory of the controller can be output to the computer by means of the Internet browser and the special software installed in the controller.
Advantages:
- effective remedy from unauthorized penetration of strangers on the protected territory, and also for control of access for employees;
- quick access (recognition of electronic key happens remotely at distance of 2-4 cm);
- one electronic key can be programmed for pass through several access points;
- control of movement of employees allows to reveal violations of labor discipline;
- direct connection of the controller in a computer network of LAN/WAN.
TECHNICAL CHARACTERISTICS | |
---|---|
Supply voltage | 12 V |
Maximum number of users | 3000 |
Emergency supply | no |
The switched current | 3 A |
Communication interface | TCP/IP |
The number of controllers in system | 1 |
Type of electronic keys | proksimiti-cards, EM-Marin standard brelka |
Maximum length of the "controller-the reader" communication line | 30 m |